Hero Splendor Underbelly Kit | Engine Belly Pan Fairing
Hero Splendor Underbelly Kit | Engine Belly Pan Fairing
Hero Splendor Underbelly Kit — Engine Belly Pan Fairing
Give your Hero Splendor a sharper, sportier stance with our precision-crafted Underbelly Kit. Designed to sit snugly beneath the engine, this belly pan fairing adds aggressive styling while shielding critical components from road debris, mud, and dust — keeping your ride cleaner and your engine bay protected.
Key Features
- Precision-fit design for Hero Splendor variants
- High-grade ABS plastic — lightweight, impact-resistant, and crack-proof
- Shields engine and frame from road debris, mud splash, and water
- Adds sporty underbelly aesthetics for a premium street look
- OEM-style mounting points — bolt-on installation, no drilling required
- Available in matte black / gloss black / custom paint-ready finish
- Easy to remove for routine engine servicing
Fitment
Compatible with: Hero Splendor Plus, Splendor Pro, Splendor iSmart, and Splendor+ (2012–2024). Check variant selection for your specific model year.
How to Fit
- Park on a centre stand — Ensure the bike is on level ground and the engine is cool before starting.
- Clean the underbelly area — Wipe down the frame and engine bottom to remove grease and mud for a flush fitment.
- Align the belly pan — Hold the underbelly kit against the frame, aligning the pre-drilled holes with the factory mounting points on the frame rails.
- Insert rubber grommets (if included) — Push grommets into each mounting hole to prevent vibration and rattling.
- Hand-tighten the bolts — Insert the provided M6 bolts through the grommets and hand-tighten into the frame mounting points. Do not use power tools at this stage.
- Check alignment — Step back and visually confirm the panel sits level and flush with the side fairings.
- Final torque — Use a 10mm spanner or Allen key to snug-tighten all bolts. Do not over-torque — finger-tight plus a quarter turn is sufficient on ABS panels.
- Test ride check — After a short ride, re-check all bolts for any loosening due to vibration.
Tip: Keep the belly pan loosely fitted during first test-fit to make positional adjustments easier before final tightening.
Frequently Asked Questions
Q: Will this fit my Hero Splendor without any modifications?
A: Yes — our underbelly kit is designed for direct bolt-on fitment using existing frame mounting points. No drilling or cutting is required for compatible model years listed above.
Q: What material is the belly pan made from?
A: It is made from high-grade ABS (Acrylonitrile Butadiene Styrene) plastic — the same material used in OEM fairings. It is lightweight, flexible enough to resist cracks on impact, and UV-stable for Indian weather conditions.
Q: Can I paint it to match my bike's colour?
A: Yes. The panel comes in a paint-ready base coat. Use standard automotive spray paint or get it colour-matched at any auto paint shop for a seamless factory-colour look.
Q: Does it affect engine cooling or airflow?
A: No. The belly pan is designed with strategic venting cutouts that maintain adequate airflow to the engine. It will not cause overheating under normal riding conditions.
Q: Will it rattle or vibrate at high speeds?
A: Not if fitted with the rubber grommets provided. The grommets absorb engine and road vibration. Re-check bolt tightness after the first 50–100 km for best results.
Q: How do I remove it for servicing?
A: Simply reverse the installation steps. All bolts are accessible from below the bike — the panel can be removed in under 5 minutes without any special tools.
Q: Is this product covered under warranty?
A: Yes — we offer a 6-month warranty against manufacturing defects. Damage due to accidents, improper installation, or modifications is not covered.