Sequential Flowing LED Turn Signals for Motorcycles – Set of 2 (Running Yellow + RED)
Sequential Flowing LED Turn Signals for Motorcycles – Set of 2 (Running Yellow + RED)
Upgrade Your Ride with Sleek Sequential LED Indicators
Turn heads and ride safer with these Sequential Flowing LED Turn Signals. Designed for modern motorcycles, these arrow-pattern indicators deliver a dynamic flowing light effect that's impossible to miss — day or night. Available in Running Yellow (standard turn signal) and RGB Multi-Colour mode for a custom look.
Why Riders Love These Indicators
- Sequential Arrow Flow Effect – Chevron-pattern LEDs light up in a smooth flowing sequence for maximum visibility and style
- Dual Mode: Running Yellow + RGB – Functions as a standard amber turn signal while also supporting RGB colour cycling for a personalised aesthetic
- Smoked Lens Design – Stealthy black housing with a smoked lens gives your bike a premium, aggressive look even when off
- Universal Fit – Standard bolt-on mount with wiring harness; compatible with most 12V motorcycles, scooters, and bikes
- Durable Build – ABS housing with chrome hardware; built to handle vibration, rain, and road conditions
- Easy Installation – Plug-and-play wiring with standard multi-wire connection
- Sold as a Pair – Includes 2 indicators (front or rear set)
Specifications
- Voltage: 12V DC
- LED Pattern: Sequential chevron/arrow flow
- Colour Modes: Running Yellow (turn signal) + RGB (decorative/DRL)
- Lens: Smoked / Dark tinted
- Housing: Black ABS plastic
- Mount: Bolt-on with chrome nut
- Wiring: Multi-wire (power, ground, turn signal, RGB control)
- Quantity: 2 pieces per set
How to Add RGB Functionality
To enable the RGB colour mode on your motorcycle:
- Connect the Yellow wire to your motorcycle's turn signal line (flashes amber when signalling)
- Connect the Black wire to chassis ground
- Connect the Red wire to a switched 12V power source (ignition-on power)
- Connect the RGB control wire(s) to a 12V RGB controller (sold separately) to cycle through colours, set static colours, or sync with music/speed
- Use an LED flasher relay if your bike hyper-flashes after installation
Tip: For a clean install, route the RGB wires through the handlebar or under the fairing and connect to a mini Bluetooth RGB controller for wireless colour control.
Frequently Asked Questions
Q: Will these fit my motorcycle?
A: These use a standard bolt-on mount compatible with most motorcycles, scooters, and custom builds. Check your existing indicator stem diameter before ordering.
Q: Do I need a load resistor?
A: If your bike uses a standard relay (not an LED-compatible one), you may experience hyper-flashing. Adding a load resistor or upgrading to an LED flasher relay fixes this easily.
Q: How do I activate the RGB mode?
A: Connect the dedicated RGB wire(s) to a 12V RGB controller. The yellow wire handles the standard turn signal function independently — both modes work simultaneously.
Q: Are these waterproof?
A: The housing is weather-resistant and suitable for regular riding conditions. Avoid prolonged submersion.
Q: Can I use these as both front and rear indicators?
A: Yes, they can be used on either end of the motorcycle depending on your preference and local regulations.
Q: Is installation difficult?
A: Basic electrical knowledge is sufficient. A professional mechanic can install them in under 30 minutes. The RGB wiring adds a few extra steps but is straightforward with a controller.